Application requiring confirmation against the correct TDS and DuPont process
Glazing and glass-surface process
Confirm the glass type, frit, mating substrate, primer or activator, and the application conditions for the exact system.
Products
BETASEAL™ 1001EM
BETASEAL™ 1001EM belongs to the BETASEAL family and the BETASEAL Glazing Adhesive Systems product group. The official record identifies this as a one-component (1K) system based on Polyurethane prepolymers. This grade should be evaluated against the substrate pair, joint design, surface condition, dispensing equipment and curing cycle of the specific process.
Primary function
What is this product used for?
BETASEAL™ 1001EM belongs to the BETASEAL family and the BETASEAL Glazing Adhesive Systems product group. The official record identifies this as a one-component (1K) system based on Polyurethane prepolymers. This grade should be evaluated against the substrate pair, joint design, surface condition, dispensing equipment and curing cycle of the specific process.
Use the exact Product Code and product configuration when reviewing this item.
Verified applications
Suitable use contexts
Surface preparation and treatment
Use the primer, wipe or surface-preparation step only in the role specified by the process for the relevant grade.
Evaluation basis
Why evaluate this product?
Density: 1.28 - 1.32 g/cm³ (ISO 845).
Before selection
Selection and operating conditions
Material pair and surface condition
Confirm the exact substrates, coatings, surface oils, cleanliness and preparation process before testing.
Joint design and technical requirements
Provide the geometry, bond line, mechanical loads, and the relevant thermal, electrical and environmental requirements.
Production conditions
Review the dispensing method, mixing ratio where applicable, working time, and the thermal or curing cycle.
TDS, SDS and testing
Review the documentation for the exact grade, evaluate a sample and confirm the process before production use.
Do not transfer specifications, primer, cleaner, activator or process conditions from another grade. Confirm the TDS and SDS, substrate pair, surfaces, equipment and testing before production approval. Contact AE-TECH to confirm documentation, package format and availability in Vietnam.
Verified source data
Key technical data
Technical characteristics
| Metric | Value | Unit |
|---|---|---|
| Chemical base | Polyurethane prepolymers | |
| Cure rate after 24 hours | ≥3 | mm |
| Solids content | ≥95 | % |
| Color | Black | |
| Skinning time | 8 - 15 min | |
| Ambient application temperature | -10 - 40 | °C |
| Surface temperature during application | -10 - 40 | °C |
| Adhesive application temperature | 5 - 45 | °C |
| Temperature stability limit | -40 - 100 | °C |
| Volume resistivity | 1E10 Ohm.cm | |
| Shear modulus | 1.8 - 2.8 | MPa |
This information is summarized from manufacturer technical and safety documentation for initial evaluation and does not replace confirmation under actual application conditions.
Technical relationships
System role and related products
Review this product within the verified Product Group, compatibility and application context.
Product group and brand
BETASEAL Glazing Adhesive Systems
BETASEAL Glazing Adhesive Systems organizes verified products and supporting technical records for selection in the relevant manufacturing context.
DuPont Automotive Adhesives & Fluids records are organized into eight technology groups for application-, material- and process-based evaluation.
8 Product Groups
Directly related solutions
Material Solutions for Automotive and Electric-Vehicle Manufacturing
AE-TECH helps manufacturers evaluate materials for bonding, thermal management, electronics protection, sealing and noise and vibration control based on the component, substrates and production conditions.
Discuss this product
Describe the application, operating conditions and technical issue so AE-TECH can review the product with you.
The online form is not available yet. Please contact AE-TECH directly.
Contact AE-TECH